Brother International 8250P Service Manual - Page 136
CHANGE DRUM SOON, Detection level of dial tone or
View all Brother International 8250P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Selector No. 1 | 3 4 | 7 8 WSW30 (Function setting 8) Function Detection level of dial tone or busy tone for the built-in TAD operation Setting and Specifications No. 1 2 3 000 : 001 : 010 : 011 : 100 : 101 : 110 : 111 : -38.0 dBm (A) -39.5 dBm (B) -41.0 dBm (C) -42.5 dBm (D) -44.0 dBm (E) -45.5 dBm (F) -47.0 dBm (G) -48.5 dBm (H) Not used. "CHANGE DRUM SOON" message 0: Yes 1: No NOTE: Selectors 1 through 3 are applicable to those models equipped with a built-in TAD. l Selectors 1 through 3: Detection level of dial tone or busy tone for built-in TAD operation If dial tone or busy tone inputted during ICM recording is below the level specified by these selectors, the TAD stops recording and disconnects the line. l Selector 8: "CHANGE DRUM SOON" message This selector determines whether or not the "CHANGE DRUM SOON" message should appear on the LCD when the service life of the laser-sensitive drum in the laser unit will expire soon. V - 43