Brother International 8250P Service Manual - Page 135
WSW29, Start, the activity report becomes full
View all Brother International 8250P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
WSW29 (Function setting 7) Selector No. Function 1 Compression threshold level for | voice signals inputted via the 3 network in the built-in TAD operation 4 Compression threshold level for | voice signals inputted via the 6 handset in the built-in TAD operation 7 Automatic dialing by caller IDs stored in the memory 8 Beep when the memory area for the activity report becomes full Setting and Specifications No. 1 2 3 000 : 001 : 010 : 011 : 100 : 101 : 110 : 111 : No. 4 5 6 000 : 001 : 010 : 011 : 100 : 101 : 110 : 111 : -47.0 dBm (A) -48.5 dBm (B) -50.0 dBm (C) -51.5 dBm (D) -53.0 dBm (E) -54.5 dBm (F) -56.0 dBm (G) OFF (H) -44.0 dBm (A) -45.5 dBm (B) -47.0 dBm (C) -48.5 dBm (D) -50.0 dBm (E) -51.5 dBm (F) -53.0 dBm (G) OFF (H) 0: Yes 1: No 0: No 1: Yes NOTE: WSW29 is applicable to those models equipped with a built-in TAD. NOTE: Selector 7 is applicable to those versions supporting the caller ID service. Note that it is not applicable to the U.S.A. versions. NOTE: Selector 8 is applicable to the European versions only. l Selectors 1 through 6: Compression threshold level for voice signals inputted via the network/ handset in the built-in TAD operation If voice signals inputted via the network or handset are below the level specified by these selectors, the TAD interprets those received voice signals as no signal, compressing the recording time. l Selector 7: Automatic dialing by caller IDs stored in the memory This selector determines whether or not the automatic dialing function by caller IDs stored in the memory (see the Note below) can be accessed. If it is set to "0," caller IDs stored in the memory can be called up on the LCD by the user function 6-7 and then pressing the Start key when the desired caller ID is displayed dials the caller automatically. (Note: The equipment can store a maximum of the latest 30 incoming caller IDs together with the reception date and time in the memory.) l Selector 8: Beep when the memory area for the activity report becomes full If this selector is set to "1," the equipment will beep when the memory area for the activity report becomes full (as well as displaying a message on the LCD, prompting the output of the activity report). V - 42