Brother International CB3-B917 Service Manual - Page 16
Disassembly
View all Brother International CB3-B917 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2. DISASSEMBLY 2. DISASSEMBLY CAUTION Turn off the power switch before starting any cleaning work, otherwise the machine may operate if the pedal is depressed by mistake, which could result in injury. * The motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until the motor stops fully before starting work. Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and diarrhoea. Keep the oil out of the reach of children. Disassembly of the sewing machine should only be carried out by a qualified technician. Use only the proper replacement parts as specified by Brother. If any safety devices have been removed, be absolutely sure to re-install them to their original positions and check that they operate correctly before using the machine. Any problems in machine operation which result from unauthorized modifications to the machine will not be covered by the warranty. 2-1. Cover 4. Face plate thread guide 6. Top cover 4. Needle bar cover 7. Bolt 1. Button tray 4. Face plate thread guide 4.Sub-tension thread guide 2. Eye guard 5. Face plate 3. Needle 2-2. Clutch 9. Brake 2. Ball bearing (5/16) 3. V-belt 4. Pulley 5. Ball bearing (7/32) 6. Spring 201s 8. Arm cover 8. Looper cover 1. Ball presser plate 7. Set screw 10. Clutch 8. Clutch tension spring 202s CB3-B916A/B917A 10