Brother International CS-8072 Users Manual - English - Page 28
NEEDLE, Checking the needle, Installing the needle securely, CAUTION - bobbin cover
View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
CONTENTS BEFORE USE NEEDLE Checking the needle CAUTION • Turn the main power switch to OFF before changing the needle. If the main power is left on and the "START/STOP" button or another operation button is pressed accidentally, the machine will start and injury may result. • Use only sewing machine needles for home use. Other needles may bend or break and cause injury. • Never sew with a bent needle. A bent needle will easily break and cause injury. To Check the Needle Correctly: To check the needle, place the flat side of the needle on a flat surface. Check the needle from the top and the sides. Throw away any bent needles. 1 Parallel space 2 Level surface (bobbin cover, glass, etc.) 1 2 * Place a level surface under the needle SEWING UTILITY STITCHES MAINTENANCE SEWING CHART Installing the needle securely 1. Push the "NEEDLE POSITION" button to raise the needle, and then turn off the power. 2. Lower the presser foot. 6 3. Loosen the needle clamp screw with a screwdriver. 4. Pull out the needle. CAUTION Do not loosen or tighten the needle clamp screw with a strong force, otherwise it may be damaged 6 1 5. With the flat side of the needle facing the back, insert the new needle all the way to the top of the needle stopper (viewing window) in the needle clamp. Use a screwdriver to securely 2 tighten the needle clamp screw. 1 Needle stopper 3 2 Hole for setting needle 3 Flat side of needle CAUTION Be sure to push in the needle until it touches the stopper, and securely tighten the needle clamp screw with a screwdriver. If the needle is not completely inserted or the needle clamp screw is loose, the needle may break or the machine may be damaged. 25 PATTERNS (PROGRAMMED IN MACHINE)