Brother International CS-8072 Users Manual - English - Page 45
BUTTONHOLE STITCHING, tightly woven fabrics, heavyweight fabrics with stretch - buttonhole foot
View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CONTENTS BEFORE USE SEWING UTILITY STITCHES BUTTONHOLE STITCHING A 11 12 13 14 15 11: Rounded buttonhole on light to medium weight fabric *2 12: Squared buttonhole for light and medium weight fabrics *1 13: Squared heavy-duty buttonhole with reinforced bar tacks in medium to heavyweight fabrics *3 14: Stretch buttonhole with reinforced bar tacks in light to medium weight stretch fabrics, medium to heavyweight tightly woven fabrics, heavyweight fabrics with stretch fabrics *2 15: Keyhole buttonhole in heavyweight fabrics for larger flat buttons *2 *1 For use on low stress or decorative applications *2 For use on average stress applications *3 For use on high stress or utility applications Note Before sewing a buttonhole on your project, practice on a scrap piece of the same type of fabric. 1. Mark the position and length of the buttonhole on the fabric. * The maximum buttonhole length is 30 mm (1-3/16'') (diameter + thickness of the button) 13 14 * Thick thread (#30) cannot be used with the " " and " " buttonhole styles. 1 A 2. Attach buttonhole foot "A". Pull out the button holder plate on the presser foot, and insert the button that will be put through 5 the buttonhole, then tighten the button holder plate around the 6 button. * The size of the buttonhole is decided by the button holder plate holding the button. 1 Button holder plate 3. Align the presser foot with the mark on the fabric, and lower the presser foot lever. 1 Mark on the fabric 2 Mark on the presser foot 5 6 CAUTION • Slide the outside frame of the buttonhole foot backward as far as possible as shown in the illustration, making sure that there is no gap behind the part of the foot marked "A". If the button- hole foot is not slid back as far as possible, the A buttonhole will not be sewn with the correct size. • Pass the thread underneath the presser foot. MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE) 42