Brother International CS-8072 Users Manual - English - Page 73
TROUBLE SHOOTING, Trouble with threads and stitches
View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
CONTENTS BEFORE USE SEWING TROUBLE SHOOTING Trouble with threads and stitches Before calling for service, check the following items. If the problem still persists, contact your nearest authorized Brother dealer. Symptom 1. Upper thread breaks 2. Bobbin thread breaks 3. Skipped stitches 4. Fabric puckers 5. Inability to thread needle 6. Thread tension is incorrect Probable cause Remedy 1. Upper threading is not correct. 1. Re-thread upper thread. 2. Upper thread is entangled. 2. Remove thread ends in the race or shuttle. 3. Spool of thread is not correctly set. 3. Set spool of thread correctly. 4. Correct needle is not used. 4. Change to proper needle. 5. Shuttle is damaged. 5. Contact service center. 1. Upper thread is entangled. 1. Remove thread ends in the race or inner shuttle. 2. Bobbin is not threaded properly in the shuttle. 2. Set bobbin properly and pull out the bobbin thread. 1. Needle is not correctly inserted. 1. Insert needle properly. 2. Correct needle is not used. 2. Change to proper needle. 3. The combination of fabric, thread and needle is not correct. 3. Check the "FABRIC/THREAD/NEEDLE COMBINATION CHART" on page 26. 4. Dust is clinging under the needle plate. 4. Remove dust by cleaning with a brush. 5. Upper threading is not correct. 5. Re-thread upper thread. 1. Threading is not correct. 1. Re-thread upper and bobbin thread correctly. 2. Correct needle is not used. 2. Change to proper needle. 3. Combination of fabric, thread and needle is not correct. 3. Check the "FABRIC/THREAD/NEEDLE COMBINATION CHART" on page 26. 4. Thread tension is not correct. 4. Refer to "THREAD TENSION" on page 20. 1. Needle position is not correct. 1. Set needle at proper position using "NEEDLE POSITION" button. 2. Hook of needle threader does not fit into the eye of the needle. 2. Set needle at proper position using "NEEDLE POSITION" button. 1. Upper threading is not correct. 1. Re-thread upper thread. 2. Set of bobbin thread is not correct. 2. Set bobbin properly and pull out the bobbin thread. 3. Combination of fabric, thread and needle is not correct. 3. Check the "FABRIC/THREAD/NEEDLE COMBINATION CHART" on page 26. 4. Presser foot holder is not correctly installed. 4. Install the foot holder correctly. UTILITY STITCHES MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE) 70