Brother International CS-8072 Users Manual - English - Page 30
SEWING TRIAL SEWING, Sewing using a utility stitch - sewing machine parts
View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
CONTENTS 1. SEWING TRIAL SEWING Sewing using a utility stitch CHAPTER 2 CAUTION • To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. • Do not use bent or broken needles. Doing so may lead to injury. • Take care that the needle does not strike basting pins or other objects during sewing. Otherwise, the needle may break and cause injury. • If stitches become bunched, lengthen the stitch length setting before continuing sewing. Otherwise, the needle may break and cause injury. BEFORE USE SEWING UTILITY STITCHES MAINTENANCE 1 2 3 4 5 2 1 1. Turn on the sewing machine. The straight stitch (left) is selected. 2. Install the correct presser foot. Place the fabric under the presser foot, then pull out about 5 cm (2") of the upper thread and pass it under the presser foot toward the rear of the machine. 1 Upper thread 2 5 cm (2") CAUTION Always use the correct presser foot. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, resulting in injury. 27 SEWING CHART PATTERNS (PROGRAMMED IN MACHINE)