Brother International CS-8072 Users Manual - English - Page 46
For Keyhole Buttonholes, When using the seam ripper to open the buttonhole
View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
CONTENTS 5 6 4. Lower the buttonhole lever so that it is positioned behind the metal bracket on the buttonhole foot. 1 Metal bracket BEFORE USE SEWING UTILITY STITCHES MAINTENANCE 1 5 6 5. Gently hold the end of the upper thread, and then start sewing. Feed the fabric carefully by hand while the buttonhole is sewn. Once sewing is completed, the machine automatically sews reinforcement stitches, and then stops. Note If the fabric does not feed (for example, because it is too thick), increase the stitch length setting. 6. Insert a pin along the inside of one of the bar tacks, and then insert the seam ripper into the center of the buttonhole and cut towards the pin. 1 Basting pin CAUTION When using the seam ripper to open the buttonhole, do not put your hand or finger in the path of the ripper. The ripper may slip and cause injury. For Keyhole Buttonholes Use the eyelet punch to make a hole in the rounded end of the buttonhole. Then insert a pin along the inside of one of the bar tacks, insert a seam ripper into the hole made with the eyelet punch, and cut towards the pin. 1 Eyelet punch 2 Basting pin 43 SEWING CHART PATTERNS (PROGRAMMED IN MACHINE)