Brother International CS-8072 Users Manual - English - Page 72
CHANGING THE LIGHT BULB, Use only light bulbs intended for use with this machine - replacement parts
View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
CONTENTS BEFORE USE SEWING UTILITY STITCHES CHANGING THE LIGHT BULB CAUTION • Turn off the main power switch and unplug the machine before changing the light bulb. If the machine is on and the "Start/Stop" button is pressed accidentally, injuries may result. • To avoid burns, give the light bulb time to cool before changing it. 1. Turn off the main power switch. 2. Use a screwdriver to loosen the screw on the back of machine light cover. Then remove the light cover. 1 Screw 2 Light cover 1 2 3. Remove the light bulb as shown, and align the projection on the light bulb with the notch in the socket. Replace it with a new light bulb. CAUTION Use only light bulbs intended for use with this machine (12V/ 5W: part no. XA2037001). You can get the proper light bulb at your authorized dealer. 4. Replace light cover and tighten the screw on the back of the machine. 69 MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE)