Brother International DCP-130C Quick Setup Guide - English - Page 15
Windows - scanner driver
UPC - 012502615699
View all Brother International DCP-130C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Windows® USB Installing the Driver & Software Windows® 5 After reading and accepting the ScanSoft® PaperPort® SE License Agreement, click Yes. 10 Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. 6 The installation of PaperPort® SE will automatically start and is followed by the installation of MFL-Pro Suite. 7 When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. 11 Insert the USB cable into the USB socket marked with a symbol. You will find the USB socket inside the machine on the right as shown below. 8 Choose Standard, and then click Next. The installation continues. 12 Carefully route the USB cable through the trench and out the back of the machine as shown below. 9 When this screen appears, go to the next step. Improper Setup • DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub. Brother recommends that you connect the machine directly to your computer. • Make sure that the cable does not restrict the cover from closing, or an error may occur. 13