Brother International DCP-130C Quick Setup Guide - English - Page 8

Installing the ink cartridges

Page 8 highlights

STEP1 Setting Up the Machine 4 Installing the ink cartridges Warning If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. 1 Make sure that the power is turned on. The LCD shows: No Cartridge 2 Open the ink cartridge cover (1). 1 4 Take out the ink cartridge. 5 Carefully remove the protective yellow cap (1). 1 3 Pull all the lock release levers down and remove the yellow protective part (1). Improper Setup DO NOT touch the area shown in the illustration below. 1 Note Do not throw away the yellow protective part. You will need it if you transport the machine. Note If the protective yellow cap comes off when you open the bag, the cartridge will not be damaged. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

Setting Up the Machine
6
STEP1
4
Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
2
Open the ink cartridge cover (1).
3
Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
4
Take out the ink cartridge.
5
Carefully remove the protective yellow cap (1).
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.
1
1
1