Brother International DCP-L2550DW Online Users Guide HTML - Page 316
Con Your Machine for a Wireless Network When the SSID Is Not Broadcast, Home >
View all Brother International DCP-L2550DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration. 1. Check and write down the current wireless network settings. Network Name (SSID) Communication Mode Infrastructure For example: Network Name (SSID) HELLO Communication Mode Infrastructure Authentication Method Open System Shared Key WPA/WPA2-PSK Encryption Mode NONE WEP WEP AES TKIP Authentication Method WPA2-PSK Encryption Mode AES Network Key - Network Key 12345678 If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. 2. Press Menu. 3. Press a or b to select the [Network] option, and then press OK. 4. Press a or b to select the [WLAN] option, and then press OK. 5. Press a or b to select the [Setup Wizard] option, and then press OK. 6. When [WLAN Enable?] appears, enable the wireless network. This will start the wireless setup wizard. 7. The machine will search for your network and display a list of available SSIDs. Press a or b to select the [] option, and then press OK. 8. Enter the SSID name, and then press OK. 9. Press a or b to select the [Infrastructure] option, and then press OK. 10. Press a or b to select the Authentication Method you want, and then press OK. 11. Do one of the following: • If you selected the [Open System] option, press a or b to select the Encryption Type [None] or [WEP], and then press OK. If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press OK. 309