Brother International DCP-L2550DW Online Users Guide HTML - Page 592
Network], Level 1, Descriptions, FAQs &, Troubleshooting
View all Brother International DCP-L2550DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 592 highlights
Level 1 Level 2 2-sided Single Image Auto Continue - Tray Command - Reset Printer For the Other models Level 3 - Descriptions For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time. Select this setting if you want the machine to clear paper size errors, and to use the paper in the tray. Select this setting if a tray mismatch appears when you use the HP drivers. Restore the printer settings to the factory settings. Level 1 Descriptions Test Print Print a test page. 2-sided Turn 2-sided printing off or on and select flip on long edge or short edge. Auto Continue Select this setting if you want the machine to clear paper size errors, and to use the paper in the tray. Reset Printer Restore the printer settings to the factory settings. [Network] For wired and wireless network models Level 1 Wired LAN Level 2 Level 3 Level 4 Descriptions TCP/IP Boot - Method Select the Boot method that best suits your needs. IP Address - Enter the IP address. Subnet - Mask Enter the Subnet mask. Gateway - Enter the Gateway address. Node Name - Enter the Node name. (Up to 32 characters) WINS - Config Select the WINS configuration mode. WINS Server Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. DNS Server Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. APIPA - Set the machine to allocate the IP address from the link-local address range automatically. IPv6 - Turn the IPv6 protocol on or off. For more detailed information, go to your model's FAQs & Troubleshooting page on the Brother support website at support.brother.com. Ethernet - - Select the Ethernet link mode. Wired Status - - View the current wired status. MAC Address - - View the machine's MAC address. Set to Default - - Restore the wired network settings to the factory settings. 585