Brother International DCP-L2550DW Online Users Guide HTML - Page 504
I Cannot Complete the Wireless Network Setup Configuration, Home >
View all Brother International DCP-L2550DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 504 highlights
Home > Troubleshooting > Network Problems > I Cannot Complete the Wireless Network Setup Configuration I Cannot Complete the Wireless Network Setup Configuration Turn your wireless router off and back on. Then, try to configure the wireless settings again. If you are unable to resolve the problem, follow the instructions below: Investigate the problem using the WLAN Report. Cause Action Interface Your security settings (SSID/ • Network Key) are not correct. • Confirm the security settings using the Wireless Setup Helper Wireless utility. For more information and to download the utility, go to your model's Downloads page on the Brother Solutions Center at support.brother.com. Select and confirm that you are using the correct security settings. - See the instructions supplied with your wireless LAN access point/router for information on how to find the security settings. - The manufacturer's name or model number of the wireless LAN access point/router may be used as the default security settings. - Consult with the access point/router manufacturer, your Internet provider, or network administrator. Your Brother machine's MAC Confirm that the Brother machine's MAC Address is allowed in the address is not allowed. filter. You can find the MAC Address on your Brother machine's control panel. Wireless Your wireless LAN access point/router is in stealth mode (not broadcasting the SSID). • Enter the correct SSID name or Network Key manually. • Check the SSID name or the Network Key in the instructions supplied with your wireless LAN access point/router and reconfigure the wireless network setup. Wireless Your security settings (SSID/ • password) are not correct. Confirm the SSID and password. - When you are configuring the network manually, the SSID and password are displayed on your Brother machine. If your mobile device supports the manual configuration, the SSID and password will be displayed on your mobile device's screen. Wi-Fi Direct You are using Android™ 4.0. If your mobile device disconnects (approximately six minutes after using Wi-Fi Direct), try the one-push configuration using WPS (recommended) and set the Brother machine as a G/O. Wi-Fi Direct Your Brother machine is placed too far from your mobile device. Move your Brother machine within about 3.3 feet (1 meter) of the Wi-Fi Direct mobile device when you configure the Wi-Fi Direct network settings. There are some obstructions Move your Brother machine to an obstruction-free area. (walls or furniture, for example) between your machine and the mobile device. Wi-Fi Direct There is a wireless computer, Bluetooth®supported device, microwave oven, or digital cordless phone near the Brother machine or the mobile device. Move other devices away from the Brother machine or the mobile device. Wi-Fi Direct If you have checked and • Turn your Brother machine off and back on. Then, try to tried all of the above, but still configure the Wi-Fi Direct settings again. cannot complete the Wi-Fi Wi-Fi Direct 497