Brother International DCP-L2550DW Online Users Guide HTML - Page 464
Error Message, Cause, Action, Manual, DR Mode in Use
View all Brother International DCP-L2550DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 464 highlights
Error Message Disconnected Document Jam DR Mode in Use Drum ! Cause Action The other person or other person's fax machine stopped the call. Try to send or receive again. If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic (for VoIP). The document was not inserted or fed Remove the jammed paper from the correctly, or the document scanned ADF unit. from the ADF was too long. Clear any debris or scraps of paper from the ADF unit paper path. Press . The machine is set to Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. The corona wire on the drum unit must be cleaned. Clean the corona wire on the drum unit. Drum End Soon Jam 2-sided Jam Inside Jam Rear Jam Tray Limit Exceeded Manual Feed No Caller ID The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Put the toner cartridge in the drum unit. Then reinstall the toner cartridge and drum unit assembly in the machine. The drum unit is near the end of its life. Order a new drum unit before you get the Replace Drum message. The paper is jammed in the 2-sided paper tray. Pull the paper tray and the 2-sided tray out completely, open the back cover and then remove all jammed paper. Close the back cover, and put the paper tray and the 2-sided tray firmly back in the machine. The paper is jammed inside the machine. Open the front cover and remove the toner cartridge and drum unit assembly. Pull out the jammed paper. Close the front cover. The paper is jammed in the back of the machine. Open the fuser cover and remove all jammed paper. Close the fuser cover. If the error message remains, press Retry. The paper is jammed in the indicated Pull the paper tray out completely and paper tray. remove all jammed paper. Put the paper tray firmly back in the machine. The print limit set in Secure Function Call your administrator to check your Lock 3.0 was reached. Secure Function Lock Settings. Manual was selected as the paper source in the printer driver, but there is no paper in the manual feed slot. Place paper in the manual feed slot. There is no incoming call history. You If you want to use the Caller ID did not receive calls or you have not feature, call your telephone company. 457