Brother International DCP-L2550DW Online Users Guide HTML - Page 463
Error Message, Cause, Action, Put the Toner Cartridge back
View all Brother International DCP-L2550DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 463 highlights
Error Message Toner Low Wait for a while Cause Action If the LCD displays this message, you Order a new toner cartridge now so a can still print. The toner cartridge is replacement toner cartridge is near the end of its life. available when the LCD displays Replace Toner. The temperature of the inside of the machine is too hot. The machine will pause its current print job and go into cooling down mode. During the cooling down mode, you will hear the cooling fan running while the LCD displays Wait for a while. Wait until the machine has finished cooling down. Make sure all vents on the machine are clear of obstructions. When the machine has cooled down, the machine will resume printing. If the fan is not spinning, disconnect the machine from the power for several minutes, then reconnect it. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Error Message Cause Action 2-sided Disable The back cover of the machine is not Close the back cover of the machine closed completely. until it locks in the closed position. The 2-sided tray is not installed completely. Install the 2-sided tray firmly in the machine. Access Denied The function you want to use is restricted by Secure Function Lock 3.0. Call your administrator to check your Secure Function Lock Settings. Cartridge Error The toner cartridge is not installed Put the Toner Cartridge back correctly. in. Pull out the drum unit and toner cartridge assembly, take out the toner cartridge, and put it back in the drum unit again. Put the drum unit and toner cartridge assembly back in the machine. If the problem continues, contact Brother Customer Service or your local Brother dealer. Comm.Error Poor telephone line quality caused a communication error. Send the fax again or connect the machine to another telephone line. If the problem continues, contact the telephone company and ask them to check your telephone line. Cooling Down The temperature of the inside of the machine is too hot. The machine will pause its current print job and go into cooling down mode. During the cooling down mode, you will hear the cooling fan running while the LCD displays Cooling Down. Wait until the machine has finished cooling down. Make sure all vents on the machine are clear of obstructions. When the machine has cooled down, the machine will resume printing. If the fan is not spinning, disconnect the machine from the power for several minutes, then reconnect it. Cover is Open The front cover is not completely closed. Open and then firmly close the front cover of the machine. The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power. Close the fuser cover located inside the back cover of the machine. The ADF cover is not completely closed. Close the ADF cover. If the error message remains, press . 456