Brother International EM611 Owner's Manual - English - Page 30

Right Margin Flush To print text aligned with the right margin, use the right margin flush function. Hold down the CODE key and press the E key. The carrier will move to the right margin and the following message will appear on the display: Type in the text. The characters are not printed, but simply appear on the display. If a mistake is made, use the BACKSPACE and FORWARD keys to locate the error. Use the CORRECTION, WORD OUT or LINE OUT key to correct it, and the RELOC key to move to the last character typed. The buzzer will sound if you run out of room between the typed characters and characters already printed. Press the CORRECTION key, and the RETURN key if you want to print on the next line. The right margin flush function is cancelled by pressing both the CODE and the keys when no characters are displayed. The carrier then returns to the left margin. To print the typed text, press the RETURN key. Justify To print text aligned with both right and left margins, use the JUST position of the operation select key. Press the OPERATE key until the JUST LED lights. Type in the text. Characters will appear on the display, but they will not be printed. When the end of a line occurs (a space "r hypl- in the Hot Zone) the text will be printed justified to the margins. Spaces will be addecrhetWeen words to fill out the line. If the TAB or RETURN key is pressed, the line will not be justified. If a mistake is made it can be corrected before printing. Use the BACKSPACE and FORWARD keys to move to the incorrect character. Press the CORRECTION key to erase the character. Type in the correct character. Press the RELOC key to return to the end of the typed text. If you reach the right margin in the middle of a word, use the BACKSPACE or CORRECTION key to return to a point where a hyphen or space can be inserted in the Hot Zone. To release justified printing, press the OPERATE key again to light the NORMAL or AUTO LED. 26