Brother International Entrepreneur Pro PR-1000 Kit 1 Instruction Manual - Engl - Page 7

CHANGING THE PATTERN SIZE WHILE MAINTAINING THE DESIRED THREAD DENSITY (STITCH RECALCULATOR) In the embroidery edit screen, the size of the pattern can be changed while the desired thread density is maintained. With this function, the pattern will be enlarged or reduced at a larger ratio than with normal pattern resizing. b Press . c Press ( ). to enter Stitch Recalculator mode Note • Be sure to sew trial embroidery using same fabric and threads as project in order to check the embroidering results. a Select the pattern to be resized, and then press . Note • This function cannot be used with alphabet character patterns, frame patterns or border patterns. However, a border pattern can be edited after this function has been used. • Patterns with a large number of stitches (about 100,001 or more) cannot be resized while maintaining a desired thread density. The maximum limit for the number of stitches differs depending on the data size of pattern. • If this function is used, thread density is maintained while the pattern is enlarged/reduced. However, the needle drop point pattern is not entirely maintained. Use the normal resizing mode the results of trial embroidering. depending on Memo • Stitch Recalculator cannot be used if not appear. does d When the following message appears, press . → The pattern will be returned to its original size, angle, and position as it was before it was edited. 6