Brother International HL-1070 Service Manual - Page 132
Action2: Install the Toner Cartridge/Drum Unit, unit. See Action 5 Illustration 4
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Action 2: Install the Toner Cartridge/Drum Unit 1 Unpack the drum unit assembly with the toner cartridge included. Gently shake it from side to side five or six times. CAUTION Do not expose the drum unit to light for longer than a few minutes, as this will damage the drum. Starter Sheet CAUTION Do not remove the starter sheet. This sheet will be ejected while the printer is warming-up after installing a new drum unit. (See Action 5 Illustration 4) 2 Open the top cover of the printer. 3 Holding the drum by its handles, install it into the printer. The drum will slide easily into place. - 2 -
![](/manual_guide/products/brother-international-hl1070-service-manual-cb9796c/132.png)
- 2 -
Action 2: Install the Toner Cartridge/Drum Unit
1
Unpack the drum unit assembly with the
toner cartridge included. Gently shake it
from side to side five or six times.
CAUTION
Do not expose the drum unit to light for
longer than a few minutes, as this will
damage the drum.
CAUTION
Do not remove the starter sheet.
This sheet will be ejected while the printer
is warming-up after installing a new drum
unit. (See Action 5 Illustration 4)
2
Open the top cover of the printer.
3
Holding the drum by its handles, install it
into the printer. The drum will slide easily
into place.
Starter Sheet