Brother International HL-1070 Service Manual - Page 142
Action5: Plug in and Turn on Your Printer, Ready, CAUTION
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Action 5: Plug in and Turn on Your Printer 1 Plug the power cord into the AC power outlet. NOTE The shape of the power cord varies according to the country of destination. 2 Turn on the power switch that is located on the left side of your printer. 3 DrumF1eeder2 Alarm PaRpeeardy ToDnearta Make sure that the Ready lamp is lit after the printer has warmed up (approximately 30 seconds). 4 Starter Sheet Make sure that the printer automatically ejects the starter sheet while the printer is warming-up immediately after installing a new drum unit. You may discard the starter sheet after it is automatically ejected. CAUTION Do not open the top cover until the printer ejects the starter sheet completely. It may cause the starter sheet to jam. - 12 -
![](/manual_guide/products/brother-international-hl1070-service-manual-cb9796c/142.png)