Brother International HL-1070 Service Manual - Page 143
Printing a Test Sample Action 6-4: Prepare DOS for the Printer
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Printing a Test Sample Page We recommend that you print a test page. Refer to the instructions below. NOTE The following first-print test page operation will be invalid after the printer receives any data from your computer. Additional test sample pages can be printed by using the "Test Print Mode" procedure in Chapter 3 of the User's Guide. Press the control panel switch. The printer will start printing a test sample page. NOTE The printer can also print settings, fonts, and hexadecimal values of received data. For more information, see "Test Print Mode" in Chapter 3 of the User's Guide. NOTE If the printer does not print a test sample page, see "CHAPTER 6 TROUBLESHOOTING, Q & A" of the User's Guide. If you are still unable to print a test sample page after reviewing the information in the User's Guide, consult your dealer. After printing the test sample page, you are ready to prepare your computer to work with the printer. The software setup varies depending upon your computer and operating system. Refer to the section relevant to your needs: Action 6-1: Installation from CD-ROM Action 6-2: Prepare Windows 95/98 for the Printer Action 6-3: Prepare Windows 3.1 for the Printer Action 6-4: Prepare DOS for the Printer Action 6-5: Prepare Macintosh for the Printer - 13 -