Brother International HL-1070 Service Manual - Page 93
Laser BD Malfunction, CPU Runtime Error
![]() |
View all Brother International HL-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
6.2 Error Codes In the event of a printer failure, error codes will be indicated as shown below. All the lamps and the specific lamps are turned ON alternately. The specific combination of lamps that are ON indicates the type of the error. Type of error Data Ready Alarm Drum Fuser Malfunction Laser BD Malfunction Scanner Malfunction ROM Error D-RAM Error Service A * Service B * Service C Service D Service E0 Service E1 Service P NV-RAM Error CPU Runtime Error * * Refer to the further description of those errors as follows; Service A: Address Error Service B: CPU Runtime Error: Bus Error The error which CPU other than the above two detects, such as Illegal Instruction or Operation Overflow HOW THE LAMPS INDICATE AN ERROR FUSER MALFUNCTION Drum Alarm Ready (Paper) Data (Toner) Time delay : OFF : ON Fig. 4-9 IV-29
![](/manual_guide/products/brother-international-hl1070-service-manual-cb9796c/93.png)