Brother International HL 1240 Users Manual - English - Page 46
How to select the RS-422A (Apple) or RS-232C (IBM) Serial Interface (For HL-1250 Only), If necessary
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
How to select the RS-422A (Apple) or RS-232C (IBM) Serial Interface (For HL-1250 Only) Note This section is only for printer models which have had the serial interface installed. ! Caution Be sure to select the serial interface type to match your computer as follows: • For Apple Macintosh computers: you should not have to change any settings because the Apple (RS-422A) setting is factory selected (default). • For IBM compatible PCs you should move the switch to the IBM (RS-232C) setting. • If you are using an Apple Macintosh on the RS-422A port and an IBM compatible PC on the parallel port, it is not necessary to make any changes to the switch setting. If necessary, select the interface type as follows: 1. Make sure that the printer is in the off-line state. 2. Select the RS-422A(Apple) or RS-232C(IBM) interface by changing the serial interface slide switch to the right to select the IBM(RS-232C) interface or to the left to select the Apple(RS-422A) interface. Fig. 2-2 Selecting the RS-422A (Apple) or RS-232C (IBM) Serial Interface 2-4