Brother International HL 1240 Users Manual - English - Page 60
Pull out the drum unit assembly. - printer cartridge
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Note Both Alarm and Data (Toner) LEDs will blink continuously to indicate that the toner is nearly empty. This blinking does not stop until you have installed a new toner cartridge. The toner cartridge is replaced in the following way. You can also view the toner cartridge replacement method in the instructional video on the supplied CD-ROM: 1. Open the front cover. Pull out the drum unit assembly. Fig. 3-2 Removing the drum Unit ! Caution • It is recommended that you put the drum unit assembly on a piece of disposable paper or cloth in case of accidental toner spill or scatter. • Do not touch the electrodes shown below to prevent damage to the printer caused by static electricity. Fig 3-3 Electrodes 3-4
3-4
Note
Both
Alarm
and
Data
(Toner) LEDs will blink continuously to indicate that the
toner is nearly empty.
This blinking does not stop until you have installed a new
toner cartridge.
The toner cartridge is replaced in the following way.
You can also view the toner
cartridge replacement method in the instructional video on the supplied CD-ROM:
±
1
.
Open the front cover.
Pull out the drum unit assembly.
Fig. 3-2
Removing the drum Unit
!
Caution
•
It is recommended that you put the drum unit assembly on a piece of disposable
paper or cloth in case of accidental toner spill or scatter.
•
Do not touch the electrodes shown below to prevent damage to the printer
caused by static electricity.
Fig 3-3
Electrodes