Brother International HL 1240 Users Manual - English - Page 89
Print a few copies of the test until the toner scatter on the printed s stops. - fuser unit
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
CHAPTER 4 TROUBLESHOOTING ! Caution Do not touch the electrodes shown below to prevent damage to the printer caused by static electricity. Fig. 4-9 Electrodes 5. Open the rear cover and pull the jammed paper out of the fuser unit. If you have to pull the paper towards the back of the printer, the fuser may get dirty with toner powder and may result in toner scatter on the next printed page or pages. Print a few copies of the test page until the toner scatter on the printed pages stops. Fig. 4-10 Pull the jammed paper 6. Close the rear cover. 7. Install the drum unit assembly and close the front cover. 4-15
CHAPTER 4 TROUBLESHOOTING
4-15
!
Caution
Do not touch the electrodes shown below to prevent damage to the printer caused by
static electricity.
Fig. 4-9
Electrodes
²
5
.
Open the rear cover and pull the jammed paper out of the fuser unit.
If you have to pull the paper towards the back of the printer, the fuser may get dirty
with toner powder and may result in toner scatter on the next printed page or pages.
Print a few copies of the test page until the toner scatter on the printed pages stops.
Fig. 4-10
Pull the jammed paper
²
6
.
Close the rear cover.
²
7
.
Install the drum unit assembly and close the front cover.