Brother International JX2517 Users Manual - English and Spanish - Page 23
Upper tension is too tight, Upper tension is too loose - case
View all Brother International JX2517 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
■ Upper tension is too tight Loops will appear on the surface of the fabric. Note ● If the bobbin thread was incorrectly threaded, the upper thread may be too tight. In this case, refer to "Lower threading" on page 13 and rethread the bobbin thread. 2 2 1 3 5 4 1 Surface of fabric 2 Back of fabric 3 Upper thread 4 Lower thread 5 Loops appear on surface of fabric Solution Reduce the tension by turning the upper tension control dial to a lower number. ■ Upper tension is too loose Loops appear on the back of the fabric. Note ● If the upper thread was incorrectly threaded, the upper thread may be too loose. In this case, refer to "Upper threading" on page 15 and rethread the upper thread. 25 1 3 4 1 Surface of fabric 2 Back of fabric 3 Upper thread 4 Lower thread 5 Loops appear on back of fabric Solution Increase the tension by turning the upper tension control dial to a higher number. 22