Brother International JX2517 Users Manual - English and Spanish - Page 32

USING ATTACHMENTS AND APPLICATIONS USING OPTIONAL ACCESSORIES L Sewing buttons Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] Foot Other Zigzag 2 Stitch 0.7 (1/32) 1.8 (1/8) Button Sewing Darning Foot Plate "M" Zigzag 3 Stitch 1.5 (1/16) 3.3 (3/16) Button Sewing Darning Foot Plate "M" Zigzag 4 Stitch 2 (1/16) 5 (3/16) Button Sewing Darning Foot Plate "M" Measure the distance between the 1 buttonholes and set the pattern selection dial to the Zigzag Stitch with the desired width. Turn off the machine. 2 Change the foot to the button sewing foot 3 "M". Place the darning plate on the needle 4 plate. Put a button between the foot and the 6 fabric and make sure that the needle enters the holes without hitting the button. If it hits, see step 1. At a slow speed, sew about 10 stitches. 7 CAUTION ● Make sure the needle does not hit the button during sewing. The needle may break and you may be injured. Pull the upper thread at the end of the 8 stitching to the wrong side of the fabric, and then tie it with the bobbin thread. X Use scissors to cut the upper thread and the bobbin thread at the beginning of the stitching. Turn on the machine. 5 CAUTION ● Do not turn on the machine while pressing down the foot controller. The machine may start unexpectedly and cause personal injury or damage to the machine. 31