Brother International MFC 5440CN Users Manual - English - Page 46
General Setup, Setting the Mode Timer, Setting the Paper Type
UPC - 012502610915
View all Brother International MFC 5440CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
General Setup Setting the Mode Timer The MFC has three temporary mode keys on the control panel: Fax, Scan and Copy. The PhotoCapture key (MFC-5840CN only) is also a temporary mode key. You can change the number of seconds or minutes that the MFC takes after the last Scan, Copy or PhotoCapture operation before it returns to Fax mode. If you select Off, the MFC stays in the mode you used last. (MFC-5840CN only) 1 Press Menu/Set, 1, 1. 2 Press ▲ or ▼ to select 0 Sec, 30 Secs, 1 Min, 2 Mins, 5 Mins or Off. Press Menu/Set. 3 Press Stop/Exit. General Setup 1.Mode Timer Setting the Paper Type To get the best print quality, set the MFC for the type of paper you are using. 1 Press Menu/Set, 1, 2. 2 Press ▲ or ▼ to select Plain, Inkjet, Glossy or Transparency. General Setup 2.Paper Type Press Menu/Set. 3 Press Stop/Exit. ■ The MFC ejects paper with printed surfaces face up onto the paper tray in the front of the machine. When you use transparencies or glossy paper, remove each sheet immediately to prevent smudging or paper jams. ■ (MFC-5840CN only) You can only use plain paper in Tray#2. GETTING STARTED 2 - 3