Brother International MFC 8840D Network Users Manual - English - Page 136
Resetting the Print/Fax Sever back to factory settings (Test Switch), Intermittent Problems - printer driver download
UPC - 012502610359
View all Brother International MFC 8840D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
6 If the job exits the queue but does not print, make sure that you are not trying to print a text job to a PostScript printer. If you have a printer that is capable of automatic language switching, make sure that the printer is not forced into PostScript mode. Resetting the Print/Fax Sever back to factory settings (Test Switch) ■ Short push: Prints a network configuration page. ■ Long push (more than 5 seconds): Resets the network configuration back to factory default setting. Test Switch LED Ethernet RJ-45 LED Intermittent Problems If the Print/Fax server and printer start up OK, but you intermittently have problems printing, check the following: 1 If you can print small jobs but large graphics jobs are distorted or incomplete, make sure that you have adequate memory in your printer and the latest printer driver installed on your computer. The latest Brother printer drivers can be downloaded from http://solutions.brother.com 2 Check the individual protocol troubleshooting sections in this chapter for additional causes of intermittent printer problems. TROUBLESHOOTING 13 - 4