Brother International MFC 8890DW Network Users Manual - English - Page 42

Configuring your machine for a wireless network (For MFC-8890DW) 1 WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES) and WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters. 2 The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format. For example: 64-bit ASCII: 64-bit Hexadecimal: 128-bit ASCII: 128-bit Hexadecimal: Uses 5 text characters e.g. "Hello" (this is case sensitive) Uses 10 digits of hexadecimal data e.g. "71f2234aba" Uses 13 text characters e.g. "Wirelesscomms" (this is case sensitive) Uses 26 digits of hexadecimal data e.g."71f2234ab56cd709e5412aa3ba" 3 This is supported for WPA-PSK only. 4 Encryption key, WEP key, Passphrase. For LEAP and EAP-FAST, record the Name and Password. For example: Network name:(SSID, ESSID) HELLO 3 3 Communication Mode Infrastructure Authentication method WPA2-PSK Encryption mode Network key AES 12345678 b Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch. c Press Menu on the control panel of the Brother machine. d Press a or b to choose Network. Press OK. e Press a or b to choose WLAN. Press OK. f Press a or b to choose Setup Wizard. Press OK. g If the following message appears, press a or b to choose On and press OK. The wired network interface will become inactive with this setting. 72.WLAN WLAN Enable ? a On b Off Select ab or OK 32