Brother International MFC 8890DW Network Users Manual - English - Page 79
Network Reset, Reset, settings before you can con the wireless settings again. Press
UPC - 012502622673
View all Brother International MFC 8890DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) 1 WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES) and WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters. 2 The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format. For example: 64-bit ASCII: 64-bit Hexadecimal: 128-bit ASCII: 128-bit Hexadecimal: Uses 5 text characters e.g. "Hello" (this is case sensitive) Uses 10 digits of hexadecimal data e.g. "71f2234aba" Uses 13 text characters e.g. "Wirelesscomms" (this is case sensitive) Uses 26 digits of hexadecimal data e.g."71f2234ab56cd709e5412aa3ba" 3 This is supported for WPA-PSK only. 4 Encryption key, WEP key, Passphrase. For LEAP and EAP-FAST, record the Name and Password. For example: Network name:(SSID, ESSID) HELLO 5 5 Communication Mode Infrastructure Authentication method WPA2-PSK Encryption mode Network key AES 12345678 • If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset, press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically. • If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once you are sure that you can print, configure the software settings following the instructions. • You need to temporarily use an Ethernet cable during configuration. (The Ethernet cable is not a standard accessory.) 69