Brother International NX-400 Users Manual - English - Page 146
The fabric does, not feed., The sewing lamp, does not come on., Nothing appears, in the LCD.
View all Brother International NX-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
APPENDIX CONTENTS Symptom The fabric does not feed. Probable Cause The feed dogs are lowered. The stitch is too fine. The presser foot that is used is not appropriate for the type of stitch that you wish to sew. The pressure of the presser foot is weak. The thread is tangled, for example, in the shuttle. The sewing lamp does not come on. The sewing lamp is damaged. Nothing appears The brightness of the LCD is either in the LCD. too light or too dark. Remedy Slide the drop feed lever to the left. Lengthen the stitch length. Attach the presser foot that is appropriate for the type of stitch that you wish to sew. Turn the presser foot pressure dial to the right to increase the pressure of the presser foot. Remove the tangle thread. If the thread is tangled in the shuttle, clean the shuttle. Contact your retailer or the nearest authorized service center. Adjust the brightness of the LCD. Reference page 97 page 56 page 128 page 39 page 135 - page 142 GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX INDEX 140