Brother International NX-400 Users Manual - English - Page 65
then press, start/stop button once.
View all Brother International NX-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Press to select . 6 To return to , press . X The machine is now set for programmed thread-cutting. Press 7 (OK key). X The initial stitch screen appears again, and appears in the lower-left corner of the screen. • When the sewing machine is turned off, the programmed thread-cutting setting is cancelled. Position the fabric under the presser foot, and 8 then press (start/stop button) once. X After reverse/reinforcement stitches are sewn, the sewing machine stops and cuts the thread. The thread is cut here. Memo ● Reverse/reinforcement stitches will not be sewn and the thread will not automatically be cut if the start/stop button is pressed at the end of the stitching. Be sure to press the reverse/reinforcement stitch button at the end of the stitching. 1 1 Start/stop button X After reverse/reinforcement stitches are sewn, the machine starts sewing. After reaching the end of the stitching, press 9 (reverse/reinforcement stitch button) once. This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn. APPENDIX INDEX Useful Functions 59