Brother International NX-400 Users Manual - English - Page 55
Starting to sew, For U.S.A. only
View all Brother International NX-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Starting to sew Once you are ready to start sewing, you can start the sewing machine. The sewing speed can be adjusted using either the operation buttons or the foot controller. ■ Using the operation buttons Sewing can be started and stopped using the operation button (start/stop button). Slide the sewing speed controller to the left or 1 right to select the desired sewing speed. Slide the sewing speed controller to the left to sew at a slower speed, or slide the speed controller to the right to sew at a faster speed. When the end of the stitching is reached, 3 press (start/stop button) once. X The machine stops sewing with the needle down (in the fabric). When you are finished sewing, raise the 4 needle, and then cut the threads. • For details, refer to "Cutting the thread" (page 53). ■ Using the foot controller Sewing can be started and stopped using the foot controller. 1 1 Sewing speed controller Press 2 (start/stop button) once. 1 1 Start/stop button X The machine starts sewing. • If you continue to hold the start/stop button pressed immediately after the sewing starts, the machine will sew at a slow speed. Turn off the sewing machine. 1 When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started. Insert the foot controller plug into its jack on 2 the side of the sewing machine. 1 1 Foot controller jack Note (For U.S.A. only) ● Foot controller: Model N5V This foot controller can be used on this machine model NX-400. APPENDIX INDEX Sewing 49