Brother International NX-400 Users Manual - English - Page 75
If necessary, specify the setting for automatic, reverse/reinforcement stitching and adjust
View all Brother International NX-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Press , , and (arrow keys) until 6 the type of stitch that you wish to use is selected. Press (OK key). 7 X The screen containing the various stitches in the selected stitch type appears. ■ Understanding the screen 1 Note ● When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Memo ● For details on adjusting the stitch width and length, refer to "Adjusting the Stitch Width and Length" (page 55). 2 1 Selected stitch type 2 Number of stitches in the selected stitch type • To select a different stitch type, press (back key). Press , , and (arrow keys) until 8 the stitch that you wish to use is selected. Press to return to the previous screen. Press to display the next screen. Press (OK key). 9 X The stitch is selected. If necessary, specify the setting for automatic 0 reverse/reinforcement stitching and adjust the stitch length, etc. • For details on sewing with each of the utility stitches, refer to the following pages. APPENDIX INDEX Selecting Stitching 69