Brother International NX570Q Operation Manual - Page 106

UTILITY STITCHES Adjust the stem of the quilting guide so that b the guide aligns with the seam that has already been sewn. Secure the quilting foot with the presser foot b holder screw. The pin on the quilting foot should be positioned over the needle clamp screw. 1 2 3 Note z The optional quilting guide is available through your dealer. Free-motion quilting With free-motion quilting, lower the feed dogs (using the drop feed lever) so that the fabric can be moved freely in any direction. The quilting foot is needed for free-motion quilting. a Pin on quilting foot b Presser foot holder screw c Needle clamp screw Hold the quilting foot in place with your right c hand, and then tighten the presser foot holder screw using the screwdriver in your left hand. 1 Note z Thread the needle manually when using the quilting foot, or only attach the quilting foot after threading the needle using the needle threader. Remove the presser foot and the presser foot a holder. • Refer to "Removing the presser foot holder" (page 43). a Presser foot holder screw CAUTION ● Be sure to securely tighten the screws with the screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break. 104