Brother International NX570Q Operation Manual - Page 98
Zipper/piping Insertion
View all Brother International NX570Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
UTILITY STITCHES Zipper/piping Insertion A zipper and piping can be sewn in place. Pattern Numeric Stitch Name Key Application Straight stitch 01 (left needle position) Attaching zippers Sewing concealed seams and piping Stitch Width [mm (inch)] Auto Manual 0.0 0.0-7.0 (0) (0-1/4) Stitch Length [mm (inch)] Auto Manual Presser Foot 2.5 0.2-5.0 (3/32) (1/64-3/16) There are many methods for inserting zippers and pipings. The procedures for inserting a centered zipper and a piping are described below, with the adjustable zipper/piping foot. Inserting a centered zipper Slide the presser foot over either the left or e right feed dog. Refer to step - a d of "Inserting a centered a zipper" (page 91). Remove the presser foot and presser foot b holder (page 43) to attach the screw-on adjustable zipper/piping foot. Note z Use a screw driver to securely tighten the screw that holds the presser foot. If the screw is loose, the needle may break and cause injures. Select stitch 01 . c Loosen the positioning screw on the back of d the presser foot. Left sewing position Right sewing position Change the needle position so that the needle f does not touch the presser foot. For details, refer to "Adjusting the stitch width" (page 58). 1 a Needle drop point CAUTION ● After adjusting the needle position, slowly turn the handwheel toward you and check the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. 1 a Positioning screw 96