Brother International NX570Q Operation Manual - Page 129
Realigning the pattern
View all Brother International NX570Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Press the numeric key (0 through 9) for the b pocket where the pattern is saved. X The saved contents of the pocket for the selected number are retrieved. Start sewing. c X The pattern for making the adjustment is sewn. X The sewing machine stops after it has • If nothing was saved in the selected pocket, a finished sewing the pattern. beep is sounded, and the screen displayed before the numeric key was pressed appears again. • To select a different pocket, use the numeric keys to type in the number of a different Check the sewn pattern. d If the part of the pattern indicated in the illustration is sewn uniformly, the pattern is correctly aligned. pocket. 3 Memo z After a decorative stitch or character stitch pattern is retrieved, press (Decorative stitch key) or (Character stitch key) to combine additional patterns with it or edit it. Realigning the pattern If the pattern is not sewn correctly, follow the steps below to adjust the sewing. Press e panel. (Settings key) in the operation X The settings screen appears. The pattern may not be sewn correctly, depending on the type of fabric being sewn or the sewing speed. If this occurs, adjust the pattern while sewing on a piece of scrap fabric that is the same as that used for your project. Attach monogramming foot "N". a Press or (Stitch length keys) until is f displayed. • For details, refer to "Replacing the presser foot" (page 41). Select b ). (No. 31 of , selected with Press (Decorative stitch key), and then use the numeric keys to type in "31". X The pattern alignment stitch is selected. X The screen for adjusting the pattern appears. Sewing the Various Built-In Decorative Patterns 127