Brother International NX570Q Operation Manual - Page 49
Do not move the sewing machine while, the wide table is attached, otherwise, damage or injuries may
![]() |
View all Brother International NX570Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Install the wide table. c Keeping the wide table level, fully slide it into Install the flat bed attachment back in its f original position. place. The lower right corner section of the wide table extends over the front section of the sewing machine bed. Memo z With the legs folded up, the wide table can 1 be stored attached to the hard case. 2 1 a Lower right corner b Sewing machine bed Note z The optional wide table is available through your brother dealer. Turn the screw at the bottom of each leg to d adjust their height so the wide table will be level with the sewing machine bed. z The knee lifter can be stored attached to the bottom of the wide table. CAUTION ● Do not move the sewing machine while the wide table is attached, otherwise damage or injuries may occur. When you are finished using the wide table, e remove it. While slightly lifting up the wide table, pull it off to the left. Sewing Cylindrical or Large Pieces 47
![](/manual_guide/products/brother-international-nx570q-operation-manual-81e98e1/49.png)