Brother International NX570Q Operation Manual - Page 144
Restrictions on oiling, Cleaning the machine surface, Cleaning the race
![]() |
View all Brother International NX570Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
APPENDIX Care and Maintenance Simple sewing machine maintenance operations are described below. Restrictions on oiling In order to prevent damaging this machine, it must not be oiled by the user. This machine was manufactured with the necessary amount of oil applied to ensure correct operation, making periodic oiling unnecessary. If problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact you authorized dealer or the nearest authorized service center. Remove the flat bed attachment. c Remove the needle plate cover. d The needle plate cover is removed differently depending on the model. ■ If there is a screw in the needle plate cover Use the disc-shaped screwdriver to remove the a screw in the needle plate cover. Cleaning the machine surface If the surface of the machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly, and then wipe the surface of the machine. After cleaning it once with a wet cloth, wipe it again with a dry cloth. CAUTION ● Unplug the power cord before cleaning the machine, otherwise injuries or an electric shock may occur. Cleaning the race Sewing performance will suffer if dust collects in the bobbin case; therefore, it should be cleaned periodically. Turn off the sewing machine. a Grasp both sides of the needle plate cover, and b then slide it toward you. a a Needle plate cover X The needle plate cover is removed. ■ If there is no screw in the needle plate cover Grasp both sides of the needle plate cover, and a then slide it toward you. Unplug the power cord from the power supply b jack on the right side of the sewing machine. CAUTION ● Unplug the power cord before cleaning the machine, otherwise injuries or an electric shock may occur. 142 a a Needle plate cover X The needle plate cover is removed.
![](/manual_guide/products/brother-international-nx570q-operation-manual-81e98e1/144.png)