Brother International NX570Q Operation Manual - Page 159
the opposite
![]() |
View all Brother International NX570Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Symptom Probable Cause Remedy Reference While winding the bobbin, the bobbin thread was wound below the bobbin winder seat. You have not wound the bobbin thread properly. After removing the thread wound below the bobbin winder seat, wind the bobbin correctly. page 151 The thread is not passed through the bobbin-winding thread guide correctly. Correctly pass the thread through the bobbin-winding thread guide. page 24 Bobbin thread does not wind neatly on Bobbin spins slowly. the bobbin. Move the sewing speed controller to the right (so that the speed will be fast). page 25 The thread that was pulled out was not wound onto the bobbin correctly. Wind the thread that was pulled off round the bobbin five or six times clockwise. page 25 Fabric being sewn with the machine cannot be removed. Thread is tangled below the needle plate. Lift up the fabric and cut the threads below it, and clean the race. page 148 The fabric feeds in the opposite The feed mechanism is damaged. direction. Contact your dealer or the nearest authorized service center. - 4 The upper thread The bobbin thread is incorrectly has tightened up. installed. Correctly install the bobbin thread. page 26, 144 The thread is tangled on the wrong side of the fabric. You have not threaded the upper thread properly. Correct the upper threading. page 28, 145 Troubleshooting 157
![](/manual_guide/products/brother-international-nx570q-operation-manual-81e98e1/159.png)