Brother International PE180D Users Manual - English - Page 26
THREAD TENSION ADJUSTMENT, Use this procedure when changing the thread tension.
View all Brother International PE180D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE THREAD TENSION ADJUSTMENT Use this procedure when changing the thread tension. Upper thread tension dial 1 Upper thread tension setting 2 Weak (Decrease thread tension) 3 Strong (Increase thread tension) A- To tighten the upper thread tension, adjust the dial to the A right. B- To loosen the upper thread tension, adjust the dial to the left. * The standard position is between "4" and "6". However, a sewing test should always be done to check for the proper thread tension. Thread tension may need to be adjusted with the use of different thread, fabric or stabilizer fabric. B ERROR MESSAGE TROUBLESHOOTING PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) Correct thread tension Adjust so that the lower thread stitch width on the reverse surface of the fabric is about one-third of the total width. Correct tension is important because too much or too little tension will cause poor quality embroidery or your fabric to pucker. 1 Top surface of fabric 2 Reverse side of fabric If upper thread tension is too strong The lower thread will be visible on top surface of the fabric. Decrease the upper thread tension. 1 Top surface of the fabric 2 Reverse side of the fabric If upper thread tension is too weak The upper thread will be loose. Increase the upper thread tension. 1 Top surface of fabric 2 Reverse side of fabric 23 EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL)