Brother International PE500 Users Manual - English - Page 14
Operation buttons - sewing machine
View all Brother International PE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operation buttons The operation buttons help you to easily perform various basic machine operations. a Start/stop button Press the start/stop button to start or stop embroidering. The machine embroiders at a slow speed while the button is pressed. When embroidering is stopped, the needle is lowered in the fabric. The button changes color according to the machine's operation mode. Green: Red: Orange: The machine is ready to embroider or is embroidering. The machine can not embroider. The machine is winding the bobbin thread, or the bobbin winder shaft is moved to the right side. b Needle position button Press the needle position button to raise or lower the needle. Be sure to raise the needle before threading the needle. Pressing the button twice sews one stitch. c Thread cutter button Press the thread cutter button after embroidering is stopped to cut both the upper thread and the bobbin threads. CAUTION ● Do not press the thread cutter button after the threads have already been cut, otherwise the needle may break, the threads may become tangled or damage to the machine may occur. Note z Do not press the thread cutter button if there is no fabric under the embroidery foot or while the machine is embroidering, otherwise damage to the machine may occur. z When cutting nylon thread or other special threads, use the thread cutter on the side of the machine. 12