Brother International PE770 Users Manual - English - Page 21

Turning on the machine Turning off the machine Before turning on the machine, be sure to attach the When you are finished using the machine, turn it off. embroidery unit to it. If the embroidery unit is not attached, the machine does not operate. (For details, In addition, before transporting the machine to another location, be sure to turn it off. 1 refer to "Attaching the Embroidery Unit" (page 15).) Prepare the included power cord. Make sure that the machine is completely a stopped. Make sure that the machine is turned off (the a main power switch is set to " "), and then plug the power supply cord into the power supply jack on the right side of the machine. Press the left side of the main power switch on b the right side of the machine to turn the machine off (set it to " "). Insert the plug of the power supply cord into a b household electrical outlet. 1 a Power supply jack Press the right side of the main power switch c on the right side of the machine to turn the machine on (set it to "|"). X The lamps, LCD and (Start/stop button) light up when the machine is turned on. X The lamps go off when the machine is turned off. Unplug the power supply cord from the c electrical outlet. Grasp the plug when unplugging the power supply cord. Unplug the power supply cord from the power d supply jack. Note z If a power outage occurs while the machine is being operated, turn off the machine and unplug the power supply cord. When restarting the machine, follow the necessary procedure to correctly operate the machine. (For U.S.A. only) z This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. Turning the Machine On/Off 19