Brother International PE770 Users Manual - English - Page 35
Xcaution - embroidery thread
UPC - 012502623489
View all Brother International PE770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Cut the thread with the cutter on the left side b of the machine. Lower the needle threader lever on the left d side of the machine until it clicks, and then slowly return the lever to its original position. 1 1 1 a Cutter Note z If the thread is pulled through and cannot be cut correctly, lower the embroidery foot so that the thread is held in place before cutting the thread. If this operation is performed, skip step c. z When using thread that quickly winds off the spool, such as metallic thread, it may be difficult to thread the needle if the thread is cut. Therefore, instead of using the thread cutter, pull out about 80 mm (approx. 3 inches) of thread after passing it through the thread guide disks (marked "7"). a Needle threader lever X The thread is passed through the eye of the needle. Note z If the needle was not completely threaded, but a loop in the thread was formed in the eye of the needle, carefully pull the loop through the eye of the needle to pull out the end of the thread. 1 a 80mm or more Lower the presser foot lever to lower the c embroidery foot. CAUTION ● When pulling out the thread, do not pull it with extreme force, otherwise the needle may break or bend. 1 a Presser foot lever Upper Threading 33