Brother International PE770 Users Manual - English - Page 33
If the spool or the spool cap is not, positioned correctly, the thread may, become tangled around
UPC - 012502623489
View all Brother International PE770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Open the top cover. d Slide the spool cap onto the spool pin. g Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left. 1 Remove the spool cap that is inserted onto the e spool pin. 1 2 a Spool pin b Spool cap Place the spool of thread onto the spool pin. f Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. While holding the thread lightly with your h right hand, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. 1 CAUTION ● If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break. a Thread guide cover Pass the thread under the thread guide plate, i and then pull it up. 1 a Thread guide plate Upper Threading 31