Brother International PEDESIGNNEXT Users Manual - English - Page 77

Jump Stitch Trimming The Jump Stitch Trimming function can be turned on or off. a Note: These settings are applied only when embroidering with our multi-needle embroidery machines. Before these settings can be specified, select under Machine Type in the Design Setting dialog box. c "Specifying the Design Page Size and Color" on page 85 The Jump Stitch Trimming button ( ) is available in the Sewing Order pane. Select a frame, and then click . Checking Embroidery Patterns b Memo: • appears if the thread trimming setting is not the same for all patterns in a frame with beside it. • The thread is cut before the thread color is changed, even if Jump Stitch Trimming has been turned off for the frame. • Click 1, then 2, then 3 to view the thread trimming locations in the Design Page. 1 2 3 ON OFF About Minimum jump stitch length for thread trimming • The jump stitch length can be specified on the Output tab into the Design Settings Dialog. (To displayed it, click Home tab in the Ribbon, then Design Setting). Basic Layout & Editing Operations • If the jump stitch length is less than the length specified for Minimum jump stitch length for thread trimming, the thread will not be cut, even if Jump Stitch Trimming has been set. • Whether or not Minimum jump stitch length for thread trimming is available differs depending on the selected machine model. For details, refer to the Operation Manual for the machine. 75