Brother International PR-600 Users Manual - English - Page 218

Sapphire.book Page 200 Friday, August 1, 2003 9:12 AM Appendix Patterns cannot be deleted from the CompactFlash card. The CompactFlash card may be damaged. During data transfer, the USB cable was disconnected. Do not disconnect the USB cable while data is being transferred. (Refer to page 111.) Patterns stored in the machine's memory cannot be recalled. The machine's memory may be damaged. Consult your nearest authorized dealer. Patterns on the embroidery card cannot be read. The embroidery card may be damaged. A pattern on an embroidery card not compatible with this machine was being recalled. Some embroidery cards with copyrighted patterns cannot be used. was touched while no embroidery card is inserted. Insert an embroidery card. (Refer to page 109.) The pattern has too many stitches and cannot be used. Data with stitches that exceed specifications (500,000 stitches) cannot be displayed. Use data design software to reduce the number of stitches. The pattern is too large. Patterns larger than 200 mm (H) × 300 mm (W) (7-7/8 inches (H) × 11-3/4 inches (W)) cannot be used. Reduce the pattern to a size smaller than that specified. More than 101 patterns are being combined. Reduce the number of patterns combined. Up to 101 patterns can be combined. More than 501 thread color changes are being specified in the pattern. Up to 501 thread color changes can be specified in a pattern. There are too many characters to be arranged on the curve. Reduce the number of characters. The pattern is larger than the embroidering area of the installed embroidery frame. Use an embroidery frame with an embroidering area that is larger than the pattern. 200