Brother International PS-2300 Users Manual - English - Page 66
Brother International PS-2300 Manual
View all Brother International PS-2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
USING ATTACHMENTS AND APPLICATIONS 6. Repeat this motion until the portion to be darned is filled with parallel lines of stitching. 6. Repita esta operación hasta que el zurcido se haya completado, creando unas cuantas líneas de puntadas paralelas. Appliques Pattern Stitch Length F-2 Aplicaciones Modelo de puntada Largo de puntada F-2 An applique is created by cutting a contrasting piece of fabric into a shape to be used as a decoration on a garment or project. 1. Baste the cut design to the fabric in the location where desired. 2. Carefully sew around the edge of the cutout design with a Zigzag Stitch in the fine stitch length. 3. Cut away the surplus fabric outside of the stitching. 4. Remove the basting, if necessary. NOTE: Make reinforcing Straight Stitches at the beginning and the end of the stitching to secure. Si queremos colocar un aplique de piel etc. que haga contraste, para utilizarla como decoración en una prenda. 1. Hilvane la aplicación recortada al tejido, en donde desee ponerla. 2. Cosa cuidadosamente los bordes del diseño con una puntada zigzag en un largo de puntada fino. 3. Recorte el tejido sobrante que quede fuera del pespunte. 4. Quite los hilvanes, si fuera necesario. NOTA: Haga unas puntadas rectas como refuerzo al principio y al final de las puntadas para que no puedan deshacerse. 60 USO DE ACCESORIOS Y APLICACIONES