Brother International RJ-3050Ai Online Users Guide PDF - Page 127
Printer Setting, Problem, Solution, Roller Maintenance, Inserting the RD Roll
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Troubleshooting Problem Solution A data transmission error appears on Is the correct port selected? your computer. Check that the correct port is selected. Is the printer in cooling mode? For RJ-3050/3050Ai, the POWER indicator is flashing in orange. For RJ-3150/3150Ai, the message "Cooling" is displayed on the LCD display. Wait until the indicator stops flashing and then try printing again. Is someone printing via the network? If you try to print while other users are printing large amounts of data, the printer is unable to accept your print job until the ongoing printing is finished. In such situations, execute the print job again after the other jobs are completed. Paper is jammed or is not ejected correctly after printing. Is there dirt or lint on the roller preventing it from rolling freely? Clean the roller. (See Roller Maintenance on page 110.) Check that the ejection path of the paper is not blocked. Check that the RD Roll is set correctly by removing the RD Roll and reinstalling. (See Inserting the RD Roll on page 10.) 8 Ensure that the RD Roll compartment cover is closed correctly. If the label peeler is being used (RJ-3150/3150Ai only), check the label peeler settings in the printer driver's dialog box or the "Printer Setting Tool". (See When Using the Label Peeler (RJ-3150/3150Ai Only) on page 13.) The print quality is poor. Is there dust or dirt on the print head or platen roller preventing it from turning freely? Clean the print head or platen roller (see Print Head Maintenance on page 109 and Roller Maintenance on page 110). Adjust the printing density. The print density can be specified in the printer driver's dialog box or the "Printer Setting Tool". 118